Adjustment Shim; Adjustment Washer - Mazda MX-5 1990 Workshop Manual

J
•
05UOJX-035
05UOJX-036
05UOJX-037
J-30
TRANSMISSION
Adjustment shim
Measure the clearance between the countershaft center bear-
ing and the bearing housing.
If not within specification, adjust the clearance by installing the
correct adjustment shim(s).
Standard clearance: 0-0.1 mm (0-0.004 in)
Adjustment shim:
0.1 mm (0.004 in), 0.3mm (0.012 in)
Mainshaft front bearing
Press the mainshaft front bearing into the bearing housing with
a suitable pipe.
Adjustment shim
Measure the clearance between the mainshaft front bearing
and the bearing housing.
If not within specification, adjust the clearance by installing the
correct adjustment shim(s) .
Standard clearance: 0-0.1 mm (0-0.004 in)
Adjustment shim:
0.1 mm (0.004 in), O.1Smm (0.006 in),
0.3mm (0.012 in)
Reverse idler gear shaft
Press the reverse idler gear into the bearing housing.
Tightening torque:
7.8-11 N·m (80-110 em-kg, 69-95 in)
Adjustment washer
Measure the clearance between the adjustment washer and
snap ring.
If not within specification, adjust the clearance by installing the
correct adjustment washer.
Maximum clearance: 0.1 mm (0.004 in)
Adjustment washer:
2.6mm (0.102 in), 2.8mm (0.110 in), 3.0mm (0.118 in)