Mazda MX-5 1990 Workshop Manual page 117

B
Steps After Installation
1 . Install the under cover.
INSTALLATION
2. If the engine oil was drained, fill with the specified amount and type of engine oil.
(Refer to page 0-5.)
3. Fill the radiator with the specified amount and type of engine coolant.
(Refer to page E-5.)
4. If the transmission oil was drained, fill with the specified amount and type of transmission oil.
(Refer to page J-8.)
5. Connect the negative battery cable.
6. Start the engine and check the following.
(1) Engine oil, transmission oil, and engine coolant leakage.
(2) Ignition timing, idle speed. (Refer to page 8-8.)
(3) Operation of emission control system.
7. Perform a road test.
8. Recheck the engine oil and engine coolant levels.
8-90
05UOBX-277