Mazda MX-5 1990 Workshop Manual page 127

D
05UODX-025
05UOBX-062
05UODX-028
0-10
OIL PUMP
Removal Note
AIC compressor
Caution
I _
• Do not damage the hoses.
1. Remove the Ale compressor with the hoses still connected.
2_ Position the compressor away from the engine and affix it
with wire.
Pulley lock bolt
1. Hold the timing belt pulley with the SST.
2. Connect the SST and loosen the pulley lock bolt.
3_ Remove the pulley lock bolt.
Timing belt pulley
Note
• If necessary, remove the pulley with a steering
wheel puller (commercially available).
1. Remove the timing belt pulley.
2. Remove the pulley Woodruff key.
Installation Note
Timing belt pulley
1. Install the timing belt pulley.
2. Install the pulley Woodruff key with the tapered side toward
the oil pump body.
Pulley lock bolt
1. Install the pulley lock bolt.
2. Tighten the pulley lock bolt using the two
SST_
Tightening torque:
108-118
N·m
(11.0-12.0
m-kg,
80-87
ft-Ib)
3. Remove the SST.