DASHBOARD AND CONSOLE
s
~~
0">
CLIP
®
CLtij
05UOSX-102
®
~
A
~
®
®
CLIP
©
05UOSX-103
CL~\
®
05U05X-l04
Removal Note
Center lower panel assembly
The clips are where shown.
Meter hood assembly
The clips are where shown.
Center panel assembly
The clips are where shown.
Adjustment Note
Airflow mode wire
1 . Set the airflow mode control lever to VENT position.
2. Connect and clamp the wire with the shutter lever on the
heater unit at its closest point.
Caution
• After installation, move the airflow mode cantrolle-
ver to be sure the wire is securely attached, and that
it moves the full stroke from DEF to VENT.
8-51