Mazda MX-5 1990 Workshop Manual page 375

1. Oil seal
Assembly Note. page
J-43
2. Snap ring
3. Steel ball
4. Speedometer drive gear
5. Snap ring
6. Transmission case
7. Extension housing
Assembly Note. page J-43
TRANSMISSION
8. Main drive gear bearing
Assembly Note. page
J-43
9. Snap ring
10. Countershaft front bearing
Assembly Note. page J-43
11. Snap ring
J
14. Front cover
15. Speedometer driven gear
16. Neutral switch
17. Back-up light switch
18. Boot
19. Release fork
12. Adjustment shim
Assembly Note. page J-44
13. Gasket
Assembly Note. page J-44
20. Release bearing
Assembly Note. page J-44
05UOJX-057
Assembly note
Oil seal
1. Apply transmission oil to outer periphery.
2. Install a new oil seal with the SST.
Extension housing
1. Apply sealant to the contact surfaces of the bearing hous-
ing and transmission case.
2. Align the inner shift lever and shift rod end groove, and in-
stall the extension housing.
3. Apply sealant to the bolt threads, and install the bolts.
Tightening torque:
16-23
N·m
(1.6-2.3
m-kg,
12-17
ft-Ib)
Main drive gear bearing
Drive on the main drive gear bearing with the SST, and se-
cure it with a new snap ring.
Countershaft front bearing
Drive on the countershaft front bearing with the SST, and se-
cure it with a new snap ring.
J-43