Cater; Camber - Mazda MX-5 1990 Workshop Manual

Hide thumbs Also See for MX-5 1990:

Table of Contents

WHEEL ALIGNMENT

ADJUSTINGL-,.f,L-IJ---!----1(£'}

Cater is adjusted by turning the front and/or rear adjusting cam

bolt at the lower arm.

• Adjust the caster before adjusting the camber.

1. Loosen the front and/or rear cam nut.

2. Turn the front and/or rear adjusting cam bolt to provide the

correct caster angle.

• Turning the front cam one graduation on the scale

changes the caster angle about 22' and the cam-

ber about 25'. Turning the rear cam one graduation

changes the caster angle about 22' and the cam-

ber about 2'.

3. Adjust the camber and the toe-in.

Camber is adjusted by turning the front and rear adjusting cam

bolts at the lower arm.

• Adjust the camber after adjusting the caster.

Loosen the front and rear cam nuts.

2. Turn the front and rear adjusting cam bolts the same amount

in the opposite direction to provide the correct camber

• Turning the front cam one graduation changes the

camber about 25' and the caster about 22'. Turn-

ing the rear cam one graduation changes the cam-

ber about 2' and the caster about 22'.

Show Quick Links

Table of Contents

Troubleshooting