Mazda MX-5 1990 Workshop Manual page 344

J
DIFFERENTIAL MOUNTING SPACER
05UOMX-125
PPF
SL~~V~
JImw---;:
BLOCK
BOLT (M6x1)
BOLT (M14X1.5)
05UOMX-070
o
05UOMX-071
J-12
TRANSMISSION
5. Remove the differential mounting spacer.
6. Turn a bolt (M14x1.5) into the sleeve.
7. Twist and pull the bolt downward.
8. Install a bolt (M6x1) into the hole in the block to hold the
sleeve, and remove the long bolt (M 14x1.5).
9. Remove the bolt (M6x1).
Caution
• Do not remove the spacers shown in the figure from
the PPF.
• If they are removed, repalce the PPF as an as-
sembly.
10. Remove the transmission-side bolts, and remove the PPF.
Transmission
Caution
• Do not violently shake the transmission, the crank
angle sensor may be damaged.
05UOJX-010
--.