Plate Type; Cartridge-Type - Mazda MX-5 1990 Workshop Manual

T
IN FUSE BOX
IIJUU
uuul
!:::==~==::!
=:J
~
c=::J c=J .
I
W
I
FUSE PULLER
05UOTX-013
05UOTX-014
05UOTX-015
T-14
FUSE
REPLACEMENT
Note
• If a fuse again fails after it has been replaced, there
is probably a short in the circuit.
• Check the circuit which is protected by the failed
fuse, referring to the specifications table.
Plate type
1. Disconnect the negative battery cable.
2. Using the fuse puller supplied in the fuse box, removed re-
place the failed fuse.
3. Reconnect the negative battery cable.
Cartridge-type
80A fuse (Black)
1. Disconnect the negative battery cable.
2. Remove the fuse block mounting nuts, and remove the serv-
ice cover.
3. Remove the fuse installation bolts, and pull out the fuse.
4. Install the new fuse and the fuse installation bolts.
5. Install the main fuse block.
6. Reconnect the negative battery cable .
•