Parameterizing using the BOP20 (Basic Operator
Panel 20)
4.1
General information about the BOP20
With the BOP20, drives can be powered-up and powered-down during the commissioning
phase and parameters can be displayed and modified. Faults can be diagnosed as well as
acknowledged.
The BOP20 is snapped onto the Control Unit; to do this the dummy cover must be removed
(for additional information on mounting, please refer to the Equipment Manual).
Overview of displays and keys
Figure 4-1
Information on the displays
Table 4-1
LED
Display
top left
2 positions
RUN
Commissioning
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Overview of displays and keys
Meaning
The active drive object of the BOP is displayed here.
The displays and key operations always refer to this drive object.
Lit if at least one drive in the drive line-up is in the RUN state (in operation).
RUN is also displayed via bit r0899.2 of the drive.
4
149