Siemens SINAMICS S120 Commissioning Manual page 154

Parameterizing using the BOP20 (Basic Operator Panel 20)
4.2 Displays and using the BOP20
Value display
To switch from the parameter display to the value display, press the "P" key. In the value
display, the values of the adjustable parameters can be increased and decreased using the
arrow. The cursor can be selected using the "FN" key.
Figure 4-3
Example: Changing a parameter
Precondition: The appropriate access level is set
(for this particular example, p0003 = 3).
154
Value display
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Commissioning