Siemens SINAMICS S120 Commissioning Manual page 137

Features
• Resolution
• Voltage range
• Measuring cycle
Short-circuit-proof
Parameterizable scaling
Adjustable offset
Adjustable limitation
Signal chart for measuring sockets
Figure 3-11
Which signal can be output via measuring sockets?
The signal to be output via a measuring socket is specified by parameterizing the connector
input p0771[0...2].
Important measuring signals (examples):
r0060
r0063
r0069[0...2]
r0075
r0076
Commissioning
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
8-bit
0 V to +4.98 V
Depends on the measuring signal
(e.g. actual speed value in speed controller cycle 125 μs)
Signal chart for measuring sockets
CO: Speed setpoint before speed setpoint filter
CO: Actual speed value
CO: Phase currents actual value
CO: Field-generating current setpoint
CO: Field-generating actual current
Diagnosis
3.2 Diagnostics via STARTER
137