Siemens SINAMICS S120 Commissioning Manual page 11

CAUTION
• As part of routine tests, SINAMICS devices with AC motors undergo a voltage test in
• Motors should be connected up according to the circuit diagram provided otherwise they
Note
When operated in dry operating areas, SINAMICS equipment with AC motors conforms to
low-voltage Directive 73/23/EEC.
Commissioning
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
accordance with EN 50178. Before the voltage test is performed on the electrical
equipment of industrial machines to EN 60204-1, Section 19.4, all connectors of
SINAMICS equipment must be disconnected/unplugged to prevent the equipment from
being damaged.
may be destroyed.
Preface
11