Siemens SINAMICS S120 Commissioning Manual page 136

Diagnosis
3.2 Diagnostics via STARTER
CAUTION
The measuring sockets should be used for commissioning and servicing purposes only.
The measurements may only be carried out by properly trained specialist personnel.
Figure 3-9
Parameterizing and using the measuring sockets
The measuring sockets are parameterized and operated via the STARTER parameterization
and commissioning tool.
Figure 3-10 "Measuring sockets" initial screen
Note
Please refer to the online help for more information about parameterizing and operation.
136
T0 Measuring socket 0
T1 Measuring socket 1
T2 Measuring socket 2
M Reference
Arrangement of the measuring sockets on the Control Unit CU310/CU320
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
with default scale setting
Commissioning