Trace Function - Siemens SINAMICS S120 Commissioning Manual

Diagnosis
3.2 Diagnostics via STARTER
3.2.2

Trace function

Description
The trace function can be used to record measured values over a defined period depending
on trigger conditions.
Parameterizing and using the trace function
The trace function is parameterized and operated via the parameterization and
commissioning tool STARTER.
Figure 3-5
Note
Please refer to the online help for more information about parameterizing and using the test
sockets.
Features
● Up to eight recording channels for each recorder; can be set via parameter p4702
● Two independent trace recorders per Control Unit
● Endless trace
132
"Trace function" initial screen
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Commissioning