Smc30 Sensor Module Cabinet - Siemens SINAMICS S120 Commissioning Manual

LED Color
Green Continuous
Orange Continuous
Red Continuous
Green/ 0.5 Hz
red flashing
light
2 Hz
flashing
light
Green/ Flashing
orange light
or
Red/
orange
3.1.12

SMC30 Sensor Module Cabinet

Table 3-14 Sensor Module Cabinet SMC30 – description of the LEDs
LED Color
RDY -
READY
Green
Orange
Red
Green/
red
Green/
red
Green/
orange
or
Red/
orange
OUT > 5 V -
Commissioning
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Status
The component is ready for operation and cyclic DRIVE-
CLiQ communication is taking place.
DRIVE-CLiQ communication is being established.
At least one fault is present in this component.
Note:
LED is driven irrespective of the corresponding messages
being reconfigured.
Firmware is being downloaded.
Firmware download is complete. Wait for POWER ON
Component recognition via LED is activated (p0144)
Note:
Both options depend on the LED status when component
recognition is activated via p0144 = 1.
State
OFF Electronics power supply is missing or outside permissible
tolerance range.
Continuous The component is ready for operation and cyclic DRIVE-
CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
Continuous At least one fault is present in this component.
Note:
The LED is activated regardless of whether the
corresponding messages have been reconfigured.
Flashing Firmware is being downloaded.
0.5 Hz
Flashing Firmware download is complete. Wait for POWER ON.
2 Hz
Flashing Component recognition via LED is activated (p0144)
Note:
Both options depend on the LED status when component
recognition is activated via p0144 = 1.
OFF Electronics power supply is missing or outside permissible
tolerance range.
Power supply ≤ 5 V.
Description, cause
Description, cause
Diagnosis
3.1 Diagnostics via LEDs
Remedy
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
–
121