Oracle ZS5 SERIES Installation Manual page 206

Performing Initial Configuration (CLI)
For detailed information, see
Administration Guide, Release
Configure Time. Configure the Network Time Protocol.
Subcommands that are valid in this context:
help [topic]
show
commit
abort
done
enable
disable
get [prop]
set [prop]
hostname:maintenance system setup ntp> set servers=0.pool.ntp.org
hostname:maintenance system setup ntp> commit
hostname:maintenance system setup ntp> done
aksh: done with "ntp", advancing configuration to "directory" ...
5. Configure name services.
For detailed information, see
Administration Guide, Release
206 Oracle ZFS Storage Appliance Installation Guide • December 2016
"NTP Configuration" in Oracle ZFS Storage Appliance
OS8.6.x.
=> Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help", "script" or "properties".
=> Show information pertinent to the current context
=> Commit current state, including any changes
=> Abort this task (potentially resulting in a
misconfigured system)
=> Finish operating on "ntp"
=> Enable the ntp service
=> Disable the ntp service
=> Get value for property [prop]. ("help properties"
for valid properties.) If [prop] is not specified,
returns values for all properties.
=> Set property [prop] to [value]. ("help properties"
for valid properties.) For properties taking list
values, [value] should be a comma-separated list of
values.
servers = 0.pool.ntp.org (uncommitted)
"Configuring Services" in Oracle ZFS Storage Appliance
OS8.6.x.