Oracle ZS5 SERIES Installation Manual page 203

igb2 false 0:14:4f:8d:59:ac
igb3 false 0:14:4f:8d:59:ad
hostname:maintenance system setup net> datalinks show
Datalinks:
DATALINK CLASS
igb0 device
hostname:maintenance system setup net> interfaces show
Interfaces:
INTERFACE STATE CLASS
igb0 up ip
hostname:maintenance system setup net> done
To create a management interface now, use the following steps as an example:
a. Go to maintenance system setup net, and then enter interfaces.
hostname:maintenance system setup net> interfaces
b.
Enter show to view the interface. Enter cd .. to return to the context for the
next step.
hostname:maintenance system setup net interfaces> show
Interfaces:
INTERFACE STATE
igb0 up
Interface
hostname:maintenance system setup net interfaces> cd ..
c.
Configure routing for the interface labeled Untitled Interface. Enter cd .. to
return to the correct context for the next step.
For detailed information, see
Appliance Administration Guide, Release
hostname:maintenance system setup net> routing
hostname:maintenance system setup net routing> create
hostname:maintenance system setup net route (uncommitted)> set destination=0.0.0.0
hostname:maintenance system setup net route (uncommitted)> set mask=0
hostname:maintenance system setup net route (uncommitted)> set interface=igb0
0 Mbit/s
0 Mbit/s
LINKS LABEL
igb0 Untitled Datalink
LINKS ADDRS
igb0 192.168.2.80/22
CLASS LINKS
ip igb0
"Configuring Network Routing" in Oracle ZFS Storage
OS8.6.x.
destination = 0.0.0.0 (uncommitted)
mask = 0 (uncommitted)
Configuring the Appliance for the First Time
Performing Initial Configuration (CLI)
LABEL
Untitled Interface
ADDRS
192.0.2.11/24
LABEL
Untitled
203