Cdr Fields For Gateway Application - AudioCodes Mediant 1000B User Manual

User's Manual
CDR Field
Source URI Before Manipulation
Destination URI
Destination URI Before Manipulation
Call Duration
Termination Side
Termination Reason
Termination Reason Category
Setup Time
Connect Time
Release Time
Redirect Reason
Redirect URI
Redirect URI Before Manipulation
Signaling IP DiffServ
IP Group Name
SRD Name
SIP Interface Name
Proxy Set Name
IP Profile Name
Media Realm Name
Direct Media
SIP Termination Reason
SIP Termination Description
Caller Display ID
Callee Display ID

57.2.1.4 CDR Fields for Gateway Application

The CDRs generated by the device for Gateway calls include media and signaling CDR
fields. The default CDR fields are listed in the table below.
The CDR can be one of the following report types (GWReportType field), depending at
which stage of the SIP dialog it was sent:

"CALL_START": CDR is sent upon an INVITE message.

"CALL_CONNECT": CDR is sent upon a 200 OK response (i.e., call is established).

"CALL_END": CDR is sent upon a BYE message (i.e., call ends).
Version 7.2
57. Reporting Information to External Party
SrcURIBeforeMap
DstURI
DstURIBeforeMap
Durat
TrmSd
TrmReason
TrmReasonCategory
SetupTime
ConnectTime
ReleaseTime
RedirectReason
RedirectURINum
RedirectURINumBeforeMap
TxSigIPDiffServ
IPGroup
SrdId
SIPInterfaceId
ProxySetId
IpProfileId
MediaRealmId
DirectMedia
SIPTrmReason
SIPTermDesc
Caller
Callee
925
Title
Mediant 1000B Gateway & E-SBC