Cdr Fields For Gateway/Ip-To-Ip Application - AudioCodes Mediant 500 E-SBC User Manual

User's Manual
CDR Field Name
RemoteRFactor
LocalMosCQ
RemoteMosCQ
TxRTPIPDiffServ
LatchedRtpIp
LatchedRtpPort
LatchedT38Ip
LatchedT38Port

48.2.2.3 CDR Fields for Gateway/IP-to-IP Application

The CDR fields for the Gateway / IP-to-IP application are listed in the table below.
Table 48-4: CDR Fields for Gateway/IP-to-IP Application
Field Name
GWReportType
Cid
SessionId
Trunk
BChan
ConId
TG
Version 6.8
Remote conversation quality
Note: If the RTCP XR feature is unavailable (not licensed or
disabled), this R-factor VoIP metric is not provided. Instead, the
device sends the CDR field with the value 127, meaning that
information is unavailable.
Local MOS for conversation
Remote MOS for conversation
Media IP DiffServ
Remote IP address of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Remote RTP port of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Latching of a new T.38 stream - new IP address
Latching of a new T.38 stream - new port
Report type:

CALL_START

CALL_CONNECT

CALL_END
Port number
SIP session identifier
Physical trunk number
Note: This field is applicable only to the Gateway application.
Selected B-channel
Note: This field is applicable only to the Gateway application.
SIP conference ID
Note: This field is applicable only to the Gateway application.
Trunk Group ID
Note: This field is applicable only to the Gateway application.
639
48. Reporting Information to External Party
Description
Description
Mediant 500 E-SBC