Cdr Fields For Gateway/Ip-To-Ip Application - AudioCodes Mediant 800B User Manual

CDR Field Name
PacketInterval
LocalRtpIp
LocalRtpPort
RemoteRtpIp
RemoteRtpPort
InPackets
OutPackets
LocalPackLoss
RemotePackLoss
RTPdelay
RTPjitter
TxRTPssrc
RxRTPssrc
LocalRFactor
RemoteRFactor
LocalMosCQ
RemoteMosCQ
TxRTPIPDiffServ
LatchedRtpIp
LatchedRtpPort
LatchedT38Ip
LatchedT38Port

47.2.2.3 CDR Fields for Gateway/IP-to-IP Application

The CDR fields for the Gateway / IP-to-IP application are listed in the table below.
Table 47-4: CDR Fields for Gateway/IP-to-IP Application
Field Name
GWReportType
Cid
SessionId
User's Manual
Coder packet interval
Local RTP IP address
Local RTP port
Remote RTP IP address
Remote RTP port
Number of received packets
Number of sent packets
Local packet loss
Remote packet loss
RTP delay
RTP jitter
Tx RTP SSRC
Local RTP SSRC
Local conversation quality
Remote conversation quality
Local MOS for conversation
Remote MOS for conversation
Media IP DiffServ
Remote IP address of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Remote RTP port of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Latching of a new T.38 stream - new IP address
Latching of a new T.38 stream - new port
Report type:

CALL_START

CALL_CONNECT

CALL_END
Port number
SIP session identifier
654
Mediant 800B Gateway and E-SBC
Description
Description
Document #: LTRT-10278