Technical data
CE mark
C-Tick mark
Other standards and
guidelines
64
10.1.12 Certificates and approvals
The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The measuring system is in conformity with the EMC requirements of the "Australian
Communications and Media Authority (ACMA)".
• EN 60529
Degrees of protection provided by enclosures (IP code).
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use.
• IEC/EN 61326
"Emission in accordance with Class A requirements".
Electromagnetic compatibility (EMC requirements).
• ANSI/ISA-S82.01
Safety Standard for Electrical and Electronic Test, Measuring, Controlling and Related
Equipment - General Requirements. Pollution Degree 2, Installation Category II.
• CAN/CSA-C22.2 No. 1010.1-92
Safety Requirements for Electrical Equipment for Measurement and Control and Laboratory Use.
Pollution Degree 2.
10.1.13 Ordering information
The Endress+Hauser service organization can provide detailed ordering information and
information on the order codes on request.
10.1.14 Documentation
• Flow measurement (FA005D/06)
•Technical Information for Prosonic Flow 93T Portable (TI00085D/06)
Proline Prosonic Flow 93T Portable
Endress+Hauser