Table of Contents
Advertisement
Technical data
Display elements
Operating elements
Language groups
!
CE mark
C-tick mark
Ex approval
Sanitary compatibility
Certification PROFIBUS
Pressure measuring device
approval
130
10.1.11 Human interface
• Liquid crystal display: illuminated, four lines with 16 characters per line
• Custom configurations for presenting different measured values and status variables
• 3 totalizers
• At ambient temperatures below –20 °C (–4 °F), the readability of the display may be impaired.
• Onsite operation with three optical sensor keys (S/O/F)
• Application-specific Quick Setup menus for straightforward commissioning
Language groups available for operation in different countries:
• Western Europe and America (WEA):
English, German, Spanish, Italian, French, Dutch and Portuguese
• Eastern Europe/Scandinavia (EES):
English, Russian, Polish, Norwegian, Finnish, Swedish and Czech.
• South and East Asia (SEA):
English, Japanese, Indonesian
• China (CN):
English, Chinese
Note!
You can change the language group via the operating program "FieldCare".
10.1.12 Certificates and approvals
The measuring system described in these Operating Instructions therefore complies with the legal
requirements of the EU Directives. Endress+Hauser confirms this by affixing the CE mark to it and
by issuing the CE declaration of conformity.
The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
Information on the currently available Ex-rated versions (ATEX, FM, CSA, etc.) is available on
request from your Endress+Hauser sales outlet. All explosion protection data are given in a separate
documentation which is available upon request.
No applicable approvals or certification
The flowmeter has successfully passed all the test procedures carried out and is certified and
registered by the PNO (PROFIBUS User Organization). The device thus meets all the requirements
of the following specifications:
• Certified in accordance with PROFIBUS Profile Version 3.0 (device certification number: available
on request)
• The measuring device can also be operated with certified devices of other manufacturers
(interoperability).
All measuring devices, including those with a nominal diameter smaller than or equal to DN 25,
correspond to Article 3(3) of the EC Directive 97/23/EC (Pressure Equipment Directive) and have
been designed and manufactured according to good engineering practice. For nominal diameters
greater than DN 25 (depending on the medium and process pressure), there are additional optional
approvals according to category II/III.
Proline Promag 55 PROFIBUS PA
Endress+Hauser
Advertisement
Table of Contents
