Endress+Hauser Proline Prosonic Flow 93T Portable Operating Instructions Manual page 34

Operation
!
34
Display (operating mode)
The display area consists of three lines in all; this is where measured values are displayed, and/or
status variables (direction of flow, bar graph, etc.). You can change the assignment of display lines
to different variables to suit your needs and preferences.
Multiplex mode:
A maximum of two different display variables can be assigned to each line. Variables multiplexed in
this way alternate every 10 seconds on the display.
Error messages:
In-depth information on how system/process errors are displayed is provided on  ä 51 ff.
Fig. 38: Typical display for standard operating mode (HOME position)
1 Main line: shows main measured values, e.g. volume flow in [l/s].
2 Additional line: shows additional measured variables and status variables, e.g. totalizer reading No. 3 in [m3].
3 Information line: shows additional information on the measured variables and status variables, e.g. bar graph
display of the end value achieved by the volume flow.
4 "Info icons" field: icons representing additional information on the measured values are shown in this field.
A full overview of all the symbols and their meaning is provided on  ä 35.
5 "Measured values" field: the current measured values appear in this field.
6 "Unit of measure" field: the units of measure and time defined for the current measured values appear in this field.
Note!
From the HOME position, you can use the OS keys to open an "Info Menu" containing the
following information:
• Totalizers (including overflow)
• Actual values or states of the configured inputs/outputs
• Device TAG number (user-definable).
OS key  Scan of individual values within the list
Esc key (X)  Return to HOME position
4 5
+24.502
v
S
+1863.97
3
v
–50 +50
Proline Prosonic Flow 93T Portable
6
x
1
y
y
x
2
%
3
A0001173
Endress+Hauser