10 Technical data
Ex Approvals
Sanitary compatibility
CE mark
Other standards and
guidelines
58
10.1.12 Certificates and approvals
Information presently available in Ex versions (ATEX, FM, CSA) can be supplied by your
E+H Sales Centre on request. All explosion protection data are given in separate
documentation that you can order as necessary.
3A authorization
The measuring system is in conformity with the statutory requirements of the EC Direc-
tives. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
EN 61326 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
NAMUR NE 21:
Association for Standards for Control and Regulation in the Chemical Industry
10.1.13 Ordering information
The E+H service organisation can provide detailed ordering information and information
on the order codes on request.
10.1.14 Accessories
There are no accessories for transmitter and sensor.
10.1.15 Documentation
System Information Promass 40 E (SI 033D/06/en)
Technical Information Promass 40 (TI 055D/06/en)
Description of Device Functions Promass 40 (BA 062D/06/en)
Supplementary documentation on Ex-ratings: ATEX, FM, CSA
Promass 40
Endress+Hauser