Group Information Line - Endress+Hauser Proline Prosonic Flow 93T Portable Operating Instructions Manual

Proline Prosonic Flow 93T Portable
Endress+Hauser
11.5.4

Group INFORMATION LINE

Function group CONFIGURATION
USER INTERFACE INFORMATION LINE CONFIGURATION
1 = Main line
2 = Additional line
3 = Information line
ASSIGN
(2600)
100% VALUE
(2601)
Functional description
1
2
3
Esc
+
-
E
Use this function to define the display value assigned to the additional line (the bottom
line of the local display) during normal measuring operation.
Options
OFF
VOLUME FLOW (CH1)
VOLUME FLOW IN % (CH1)
SOUND VELOCITY (CH1)
SIGNAL STRENGTH (CH1)
FLOW VELOCITY (CH1)
VOLUME FLOW BARGRAPH IN % (CH1)
SIGNAL BARGRAPH IN % (CH1)
ACTUAL CURRENT 1
TOTALIZER (1 to 3)
OPERATING/SYSTEM CONDITIONS
FLOW DIRECTION
ACCUMULATOR CHARGE
ACTUAL CURRENT INPUT
VOLUME FLOW DEVICE 2
Factory setting
ACCUMULATOR CHARGE
!
Note!
This function is not available unless VOLUME FLOW IN % was selected in the ASSIGN
function (2600).
• VOLUME FLOW IN % (CH1)
• VOLUME FLOW BARGRAPH IN % (CH1)
• SIGNAL BARGRAPH IN % (CH1)
Use this function to define the flow value to be shown on the display as the 100%
value.
User input
5-digit floating-point number
Factory setting
Depends on nominal diameter and country, [value] / [dm
Corresponds to the factory setting for the full scale value ( ä 118).
Description of Device Functions
3 3
to m or US-gal to US-Mgal]
A0001253
81