10.1.12 Certificates And Approvals - Endress+Hauser Proline Promass 83 Operating Instructions Manual

Technical data
CE mark
Ex approval
Sanitary compatibility
PROFIBUS DP/PA
certification
Pressure device approval
Functional safety
Other standards and
guidelines
170
• Western Europe and America (WEA):
English, German, Spanish, Italian, French, Dutch and Portuguese
• Eastern Europe and Scandinavia (EES):
English, Russian, Polish, Norwegian, Finnish, Swedish and Czech
• South and east Asia (SEA):
English, Japanese, Indonesian
• China (CIN):
English, Chinese
You can change the language group via the operating program "ToF Tool - Fieldtool Package".

10.1.12 Certificates and approvals

The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by your E+H
Sales Centre on request. All explosion protection data are given in a separate documentation which
is available upon request.
• 3A authorization (all measuring systems, except Promass H)
• EHEDG-tested (Promass A and Promass I only)
The flowmeter has successfully passed all the test procedures carried out and is certified and
registered by the PNO (PROFIBUS User Organisation). The device thus meets all the requirements
of the following specifications:
• Certified to PROFIBUS Profile Version 3.0 (device certification number: available on request)
• The measuring device can also be operated with certified devices of other manufacturers
(interoperability).
Flowmeters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the
European directive 97/23/EC (Pressure Equipment Directive) and are designed according to sound
engineer practice. For larger nominal diameters, optional approvals according to Cat. II/III are
available when required (depends on fluid and process pressure).
SIL 2:
In accordance with IEC 61508/IEC 61511-1 (FDIS)
EN 60529:
Degrees of protection by housing (IP code)
EN 61010
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.
EN 61326/A1 (IEC 1326)
"Emission in accordance with requirements for class A". Electromagnetic compatibility
(EMC requirements)
NAMUR NE 21:
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
NAMUR NE 43:
Standardisation of the signal level for the breakdown information of digital transmitters with
analogue output signal.
NAMUR NE 53:
Software of field devices and signal-processing devices with digital electronics
Proline Promass 83 PROFIBUS DP/PA
Endress+Hauser