Block User Interface; Group Control - Endress+Hauser Proline Prosonic Flow 93T Portable Operating Instructions Manual

Description of Device Functions
72
11.5

Block USER INTERFACE

11.5.1

Group CONTROL

Function group BASIC CONFIGURATION
USER INTERFACE CONTROL BASIC CONFIGURATION
LANGUAGE
(2000)
DISPLAY DAMPING
(2002)
Functional description
Use this function to select the language for all texts, parameters and messages shown
on the local display.
!
Note!
The displayed options depend on the available language group shown in the
LANGUAGE GROUP (8226) function.
Language groups
Language groups WEST EU / USA
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
PORTUGESE
Language groups EAST EU / SCAND.
ENGLISH
NORSK
SVENSKA
SUOMI
POLISH
CZECH
RUSSIAN
Language group ASIA
ENGLISH
BAHASA INDONESIA
JAPANESE (syllabary)
Language group
CHINESE
CHINESE
ENGLISH
Factory setting
Country-dependent ( ä 118)
!
Note!
• If you press the Q keys simultaneously during startup, the language defaults to
"ENGLISH".
• You can change the language group via the operating program "FieldCare".
Use this function to enter a time constant defining how the display reacts to severely
fluctuating flow variables, either very quickly (enter a low time constant) or with
damping (enter a high time constant).
User input
0 to 100 seconds
Factory setting
1 s
!
Note!
Setting the time constant to zero seconds switches off damping.
Proline Prosonic Flow 93T Portable
Endress+Hauser