Group Additional Line - Endress+Hauser Proline Prosonic Flow 93T Portable Operating Instructions Manual

Proline Prosonic Flow 93T Portable
Endress+Hauser
11.5.3

Group ADDITIONAL LINE

Function group CONFIGURATION
USER INTERFACE ADDITIONAL LINE CONFIGURATION
1 = Main line
2 = Additional line
3 = Information line
ASSIGN
(2400)
100% VALUE
(2401)
Functional description
1
2
3
Esc
+
-
E
Use this function to define the display value assigned to the additional line (the middle
line of the local display) during normal measuring operation.
Options
OFF
VOLUME FLOW (CH1)
VOLUME FLOW IN % (CH1)
SOUND VELOCITY (CH1)
SIGNAL STRENGTH (CH1)
FLOW VELOCITY (CH1)
VOLUME FLOW BARGRAPH IN % (CH1)
SIGNAL BARGRAPH IN % (CH1)
ACTUAL CURRENT 1
TOTALIZER (1 to 3)
FLOW DIRECTION
ACCUMULATED CHARGE
ACTUAL CURRENT INPUT
VOLUME FLOW DEVICE 2
Factory setting
TOTALIZER 1
!
Note!
This function is not available unless VOLUME FLOW IN % was selected in the ASSIGN
function (2400).
• VOLUME FLOW IN % (CH1)
• VOLUME FLOW BARGRAPH IN % (CH1)
• SIGNAL BARGRAPH IN % (CH1)
Use this function to define the flow value to be shown on the display as the 100%
value.
User input
5-digit floating-point number
Factory setting
Depends on nominal diameter and country, [value] / [dm
Corresponds to the factory setting for the full scale value ( ä 118).
Description of Device Functions
3 3
to m or US-gal to US-Mgal]
A0001253
77