10.1.12 Certificates And Approvals - Endress+Hauser Proline t-mass 65 PROFIBUS DP Operating Instructions Manual

Technical data
Ex approval
PROFIBUS DP certification
Pressure device approval
CE mark
C-Tick mark
Other standards and
guidelines
100

10.1.12 Certificates and approvals

Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by your
Endress+Hauser representative on request. All explosion protection data are given in a separate
documentation which is available upon request.
Hazardous area
II2GD / Cl. 1 Div. 1
Fig. 44: Example of t-mass devices in the hazardous area (Example t-mass 65F)
The measuring system has successfully passed all the test procedures carried out and is certified and
registered by the PNO (PROFIBUS User Organization). The device thus meets all the requirements
of the following specifications:
• Certified in accordance with PROFIBUS Profile Version 3.0 (device certification number:
available on request)
• The measuring system can also be operated with certified devices of other manufacturers
(interoperability).
Flowmeters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the
European directive 97/23/EC (Pressure Equipment Directive) and are designed according to sound
engineering practice. For larger nominal diameters, optional approvals according to Cat. III are
available when required (dependent on fluid and process pressure).
The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The measuring system meets the EMC requirements of the Australian Communications and Media
Authority (ACMA).
EN 60529:
Degrees of protection by housing (IP code)
EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.
EN 61326/A1 (IEC 1326)
"Emission in accordance with requirements for Class A". Electromagnetic compatibility (EMC-
requirements)
NAMUR NE 21:
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
NAMUR NE 53:
Software of field devices and signal-processing devices with digital electronics
II3G / Cl. 1 Div. 2
Esc
- + E
EX
Proline t-mass 65 PROFIBUS DP
Safe area
EX
a0005128-en