Fig. 9: Adsl Interface (Rj11) - Funkwerk TR200aw User Manual

Funkwerk Enterprise Communications GmbH
funkwerk TR200aw/bw
Pin
3
4
5
6
7
8
4.1.5.2 ADSL interface
The ADSL interface is connected via an RJ11 plug.
For Annex A connection, a cable with RJ 11 plug for the device connection and RJ 11 plug
for connection to the ADSL splitter is required. (cable included.)
For Annex B connection, a cable with RJ 11 plug for the device connection and RJ 45 plug
for connection to the ADSL splitter is required. (cable included.)
Only the two inner pins are used for the ADSL connection.

Fig. 9: ADSL interface (RJ11)

The pin assignment for the ADSL interface (RJ11 socket) is as follows:
RJ11 socket for ADSL connection
Pin
1
2
3
4
5
6
4.1.5.3 Internal ISDN S0 interface
funkwerk TR200aw/bw has an internal ISDN S0 interface.
Function
RD + (Ethernet)
RX (console)
GND (console)
RD - (Ethernet)
GND (console)
TX (console)
Function
Not used
Not used
a
b
Not used
Not used
4 Technical Data
77