Chapter 5 Access And Configuration; Access Options; Access Via Lan - Funkwerk TR200aw User Manual

5 Access and Configuration
80

Chapter 5 Access and Configuration

This chapter describes all the access and configuration options.

5.1 Access Options

The various access options are presented below. Select the procedure to suit your needs.
There are various ways you can access your device to configure it:
• Via your LAN
• Via the serial interface
• Via an ISDN connection

5.1.1 Access via LAN

Access via one of the Ethernet interfaces of your device allows you to to open the Funk-
werk Configuration Interface in a web browser for configuration purposes and to access
your device via Telnet or SSH.
5.1.1.1 HTTP/HTTPS
With a current web browser, you can use the HTML interfaces to configure your device. For
this, enter the following in your web browser's address field
•
or
5.1.1.2 Telnet
Apart from configuration using a web browser, with a Telnet connection you can also ac-
cess the SNMP shell and use other configuration options. These are described in
ation options on page 87.
You do not need any additional software on your PC to set up a Telnet connection to your
device: Telnet is available on all operating systems.
Proceed as follows:
Funkwerk Enterprise Communications GmbH
funkwerk TR200aw/bw
Configur-