Automatic Time Adjustment - Panasonic KX-TAW848 Features Manual

Item
Flexible
Numbering Type
Operator/Local
Access
Remote
Maintenance
Number
2.3.4

Automatic Time Adjustment

Description
The PBX clock can be adjusted automatically in the following two ways:
1.
Daylight Saving Time Setting
The start and end dates of Daylight Saving Time can be programmed. The PBX clock will automatically
adjust itself one hour forward or backward at 2:00 A.M. on the programmed date, if enabled through
system programming. At 2:00 A.M. on the start date, the clock will change to 3:00 A.M., and at 2:00
A.M. on the end date, the clock will change to 1:00 A.M.
Note
If a Timed Reminder (Wake-up call) is set:
– On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and 3:00 A.M. will
not ring.
– On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and 2:00 A.M. will
ring twice.
2.
Time Information from Telephone Company
Time information can be received when an incoming call with Caller ID which includes time information
is received.
The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through system
programming.
Note
If a Timed Reminder (Wake-up call) is set, the setting will not ring or will ring twice depending on the
adjustment.
Parameter
1. Pattern 1
Select whether or not the prefix " " must be entered before dialing
(with ) feature numbers.
2. Pattern 2 [Example] Call Pickup feature number
(without ) Pattern 1 (with
Pattern 2 (without
Note that certain feature numbers (Line Access numbers, Operator
Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the [Flexible
Numbering Table (available while a dial tone is heard)] (→ 2.3.5
Flexible Numbering/Fixed Numbering).
1. 0/9 Select the feature numbers for Operator Call and Idle Line Access.
2. 9/0 These will be either 0 and 9, respectively, or 9 and 0, respectively.
Remote Enter the complete telephone number of the PBX (including the
Maintenance Dial country code). When necessary, this number will be used to access
Number the PBX from a remote location for maintenance purposes.
Description
): 41
): 41
2.3 System Data Control
Feature Guide 187