Figure 10 8/40 SAN Switch shipping carton contents
Table 8 8-Gb SAN Switch shipping carton checklist
Number
Description
One accessory kit, containing the following items:
•
One set of HP StorageWorks product documentation, including HP Storage-
Works 8-Gb SAN Switch quick start instructions, HP StorageWorks SAN
Switch Rack Mount Kit installation instructions, Read Me First, Safety Guides,
User License, and Warranty
•
One serial cable, approximately 3 meters (10 ft.)
•
Plenum (not shown) ships in your switch accessory kit only if required for in-
stalling your switch in an HP custom rack. See the HP StorageWorks SAN
1
Switch Rack Mount Kit installation instructions for details. The plenum is an air
duct that attaches to the SAN Switch Rack Mount Kit switch rails.
•
Four rubber feet for mounting on a flat surface (a lab bench, for example)
•
EZSwitch Setup CD
•
One or two grounded power cords, as required for your particular switch
•
Power Distribution Unit (PDU) power cords, as required for your particular
switch
SAN Switch Rack Mount Kit hardware and rail assemblies:
•
Two rear mounting brackets
2
•
A right inner rail and a right outer rail
•
A left inner rail and a left outer rail
One 8-Gb SAN Switch, including power supply and fan assembly units
3
32
Installing and configuring an 8-Gb SAN Switch