Restoring The System Configuration Settings - HP StorageWorks 8B - FC Entry Switch Getting Started Manual

Restoring the System Configuration Settings

Setup
1. Verify that the RSHD service (on a UNIX machine) or the FTP service
(on a Windows machine) is running on the host workstation.
2. Log on to the switch as the admin user.
3. At the command line enter the following command:
configUpload "hostIPaddr", "user",
"path_filename","password"
where
hostIPaddr
User ID used to log into this computer,
location and filename of the configuration file, and
password for the user ID specified. If only
the system prompts you for each parameter.
Example:
switch:admin> configupload
Server Name or IP Address [host]: 123.45.678.901
User Name [user]: kelev
File Name [config.txt]: switch1
Protocol (RSHD or FTP) [rshd]: ftp
Password:
upload complete
To restore the system configuration settings from a backup:
1. Verify that the RSHD service or the FTP service is running on the host
workstation (Windows or UNIX).
2. Login to the switch as the admin user.
3. Shut down the switch by entering the following command:
switchDisable
4. At the command line enter the following command:
configDownload "hostIPaddr", "user",
"path_filename","password"
where
hostIPaddr
the configuration file,
computer,
path_filename
is the IP address of the host computer,
path_filename
is the IP address of the host computer containing
is the User ID used to log into this
user
is the path location and filename of the
user
is the path
is the
password
is entered
configUpload
is the
29