Modifying The Stitching Start Position [12]-6 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(6) Modifying the stitching start position
[Example] The stitching start position A point in the stitching data will be modified to the B point as
shown below.
Operation details
1. Selecting the stitching start position movement
2. Moving to the modification position and setting the data
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change
Stitching Start Position Move
* Press to set the data.
The work holder will automatically
move to the current stitching start
position. (*1)Take care when the
needle is lowered, etc.
* Press the arrow keys to move the
position to the B point.
* Press .
(The sewing start position will be
modified.)
When the modifications are undone,
the work holder will automatically
return to the home position. Take care
when the needle is lowered, etc.
* If is pressed here, the screen
will change to the previous screen.
and
.