Point Input [9]-20 - Mitsubishi PLK-E Series Technical Manual

(6) Point input
[Example] The following type of pattern data will be created.
Operation details
1. Inputting feed data to A point
and set the code to FEED.
2. Setting feed data to A point
Methods of creating stitching data
* Press and
the Standard screen. After making the
various settings on the Data Setting
Input screen, the Arrow Input screen
will open.
[Memo] With point input, the stitch
length setting on the Data
Setting Input screen will be
ignored.
* Check that the code is set to FEED.
If different code is set, press
* Press the arrow keys and move to the
A point.
(Feed data to A point.)
* The movement amount can be
confirmed.
* Press to set the data.
(Feed data to A point.)
* To change the stitching type to
"POINT INPUT", press the input
method setting key.
(In this case, the
on
key.)