Mitsubishi PLK-E Series Technical Manual page 32

Description of arrow input screen
The arrow input screen is described below.
(1)
(2)
(3)
(1) "Data entry method setting key"
The basic data entry method currently set will appear. (Point, straight line, broken line, circle, arc,
curve) Press this key to display the data entry method setting screen.
(2) "Multi-stitching, reverse multi-stitching, offset data setting key"
The multi-stitching, reverse multi-stitching, and offset data currently set will appear. (Not set,
multi-stitching (feed data mode), reverse multi-stitching (feed data mode), multi-stitching (sewing
mode), reverse multi-stitching (sewing mode), offset) Press this key to display the multi-stitching,
reverse multi-stitching, offset data setting screen. Using this screen, you can set detailed data.
(3) "Zigzag setting key"
The zigzag currently set will be displayed (zigzag or non-zigzag). Press this key to display the
detailed zigzag data setting screen. Using this screen, you can set the detailed zigzag data.
(4) "Back tack setting key"
The back tack currently set will appear. (No back tacking, start/end back tacking, overlap back
tacking) Press this key to display the detailed back tacking data setting screen. Using this screen,
you can set detailed back tacking data.
(5)[Kind of code display]
FEED --- Feed
FEND --- Feed end cord (Displayed while JOG is operating)
SEW --- Basic input (Straight line, Arc, Circle, Curve, Broken line, Point)
P --- Multiple sewing
I --- Reverse multiple sewing
O --- Offset sewing
Z --- Zigzag sewing
B --- Back tacking sewing
(Others, the various code data is displayed while JOG is operating. Please refer to the code data
table of P.[9]-24.)
(4)
"Arrow/image display"
When the needle is at the final stitch (current needle position = total number
of stitches), arrow mark keys will appear and data entry will be possible. To
enter the position value, move the work holder using the arrow mark keys.
During operation in the jog mode (current needle position < total number of
stitches), the image currently creating will be displayed.
Creating simple stitching data
[8]-3
The current status will be
displayed.
"Needle position": Shows the "current
needle position value/total number of
stitches".
* "X, Y" when the needle is at the final
stitch (current needle position value =
total number of stitches): Shows the
position values entered with the arrow
mark keys.
"Stitch length", "speed", "code": Shows
the currently-set values.
"P": Shows the number of points
entered for an arc, curve, etc.
*"X, Y", "stitch length", "speed", "code"
during inching operation (current needle
position < total number of stitches):
Shows the needle data of the specified
position.