Mitsubishi PLK-E Series Technical Manual page 128

3. Determining the block modification range (start point)
4. Determining the block modification range (end point)
5. Moving and setting the modification origin jog position
* Using Jog ,
the start point position.
(Home position)
* Press .
* Using Jog ,
the end point position.(A point)
* Press Jog Validity
* Press .
When the end point is determined, the
work holder will automatically return to
the start point. Take care when the
needle is lowered, etc.
* Using Jog ,
the position to be modified.
(E point in this example.)
* Press .
Modification mode
, determine
, determine
.
, move to