Modifying A Block 4 (Changing The Feed Data) [12]-38 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(18) Modifying a block 4 (Changing the feed data)
Methods for designating the modification position with the jog keys.
when using the modification origin data as a reference.)
[Example] The E point and F point in the following type of data are each modified to the E' point and F'
point.
Operation details
1. Selecting block modification
2. Selecting the input type
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change
Block Modify
* Press
* Press Feed data
* Press
[12]-38
(This is handy
and
.
to open the next screen.
.
to set the data.