Modifying Code Data (Deleting Code Data) [12]-54 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(24) Modifying code data (Deleting code data)
[Example] The needle UP halt code (USTP) will be deleted from the D point of the following type of
stitching data.
Operation details
1. Selecting code data deletion
2. Determining the code deletion position
[12]-53
* Enter the modification mode.
* Press Code Data Change
then press Code Data Delete
* Press
* Using Jog
the position to delete the code.
(D point)
* Press
the position.
, and
.
to open the next screen.
, , determine
after determining