Mitsubishi PLK-E Series Technical Manual page 41

Methods of creating stitching data
3. Changing the input method
4. Designating arc input
5. Setting B point and C point
* The movement amount will be cleared.
* The code will change to "SEW".
* If the stitching type is not
INPUT", (if the type is
INPUT"), press
type.
(The currently set stitching type will be
displayed on the key.)
* Press and then press
* The system will return to the arrow
input screen.
* Press the arrow mark key to move to
point B.
* The movement amount can be
confirmed.
* Press to determine point B.
* Press the arrow mark key to move to
point C.
* Press and set the arc input.
"ARC
"LINEAR
and change the
.