Reading, Writing And Erasing Data (Internal Memory) [6] - Mitsubishi PLK-E Series Technical Manual

2. Setting the pattern name and number
3. Starting writing
Reading, writing and erasing data (internal memory)
[6]-2
* Set the pattern name and number.
(The default pattern name and number
are set.)
To change the pattern name,
press
the number press
Highlight the key, and then change the
setting.
When the
one of the alphanumeric characters
from the right can be deleted from the
pattern name or number.
* Press
* If the same number as the data
number to be written is found in the
internal memory, a message prompting
whether to overwrite the same number
will appear.
If is pressed at this time,
the Write screen will reappear without
overwriting the data.
If the data can be overwritten,
* After the message indicating writing in
progress
screen will reappear.
Memo When
empty capacity of an internal
memory is seen.
, and to change
.
key is pressed,
.
press
appears, the Standard
is pushed,
.