Mitsubishi PLK-E Series Technical Manual page 136

Modification mode
(20) Modifying stitch length (All After designated stitch)
[Example] The stitch length from stitching data point A to the end of stitching is modified as
shown below. (3.0mm → 9.0mm)
Operation details
1. Selecting the stitch length modification
2. Determining the modification start position
[12]-45
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change
Stitch length modification
* Press
* Determine the position to be modified
with jog
position
to start modification (point A).
* Press
and
.
to open the next screen.
. Set to the