Modifying A Block (Changing The Prior/Subsequent Data) [12]-20 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(13) Modifying a block (Changing the prior/subsequent data)
[Example] The section between the D point and E point of the following type of stitching data will be
moved to the D' point to E' point. At this time, the data prior to and after the D' point to E' point
will be changed.
Operation details
1. Selecting block movement
2. Determining the block modification range (start point)
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change
Block Move .
* Press to open the next screen.
* Using Jog ,
the start point position.(D point)
* Press .
and
, determine