Modifying The Stitching Speed (All Sections After Designated Position) [12]-48 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(21) Modifying the stitching speed (All sections after designated position)
[Example] The stitching speed for all sections after the B point in the following type of stitching data will
be changed to medium-high speed(MD1).
Operation details (All sections after designated position)
1. Selecting stitching speed modification
2. Determining the modification position
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitching Speed Change
* Press to open the next screen.
* Using Jog ,
the start point position to be
modified(B point).
* Press after determining the
positions.
.
, determine