Mitsubishi PLK-E Series Technical Manual page 62

3. Arrow input screen
4. The pattern data input before return end
5. Input the return end and the data completion
Methods of creating stitching data
* Does not become SEW (Sewing) input
mode and it is FEED input mood after
input the "BAT" code.
* Input the feed data to the next B point.
* Input the "BAT" code and the feed
data from H point to A point repeating.
* It is not input the "BAT" code before
the last of return end but the sewing
data is input. Inputs here only by 1
stitch of the straight line.
Memo
The purpose of inputting the sewing
data at the end is to put the thread
trimmer (TRIM) code by the automatic
operation when the return end is input.
The thread trimmer(TRIM) code cannot
be input after the sewing data.
* The return end is input and it is
completion.