Mitsubishi PLK-E Series Technical Manual page 109

Modification mode
3. Determining the block modification range (end point)
4. Setting the movement method and stitch length
5. Determining the movement amount
[12]-23
* Using Jog
the end point position.(E point)
* Press
When the end point is determined, the
presser will automatically return to the
start point. Take care when the needle
is lowered, etc.
* Set the movement method.
Press Add New Stitch To
Prior/Subsequent Data
* Set the stitch length.
(Set to 3.0mm for this example.)
* Press
* Using the arrow keys, determine the
movement amount. (Move to the
position (point D').)
* Press
(The block position will be modified.)
The presser will move. (The presser
will move to one stitch before the D
point.) Take care when the needle is
lowered, etc.
, , determine
.
.
.
.