Arc Input [9]-4 - Mitsubishi PLK-E Series Technical Manual

(2) Arc input
Operation points
* Designate arc input (
* Input three points (An arc, passing through the current position (already input) and two newly
input points, is created.)
[Example] The following type of pattern data will be created.
Operation details
1. Inputting feed data to A point
2. Setting feed data to A point
)
[9]-4
Methods of creating stitching data
* Press and
the Standard screen. After making the
various settings on the Data Setting
Input screen, the Arrow Input screen
will open.
* Check that the code is set to FEED.
If different code
and set the code to FEED.
* Press the arrow keys and move to the
A point.
(Feed data to A point.)
* The movement amount can be
confirmed.
* Press to set the data.
* Data on feed data to point A will be
created.
on
is set, press