Writing (To Floppy Disk) [5]-3 - Mitsubishi PLK-E Series Technical Manual

Reading, writing and erasing data (floppy disk)
(2) Writing (to floppy disk)
The sewing data of 224 patterns can be written in the maximum. (The
Memo
number of patterns which can be written according to the content of the
data. )
Operation points
* Select Write from the menu.
* Change the target to the floppy disk.
* Set the pattern name and number, and start writing.
Operation details
1. Selecting data write
2. Setting the pattern name and number
[5]-2
* Press
and open the Menu mode.
* Press
* In the same manner as when reading
data, the default mode when the
screen is opened is the internal
memory mode. Change to the floppy
disk mode. (Refer to steps 2 and 3 for
reading data.)
* Set the pattern name and number.
(The default pattern name and number
are set.)
To change the pattern name,
press
the number press
Highlight the key, and then change the
setting.
*When the
one of the alphanumeric characters
from the right can be deleted from the
pattern name or number.
on the Standard screen,
, and to change
.
key is pressed,