Table of Contents
Advertisement
3. The Data Setting Input screen will open.
* If the data has not been input on the Standard screen, the
To clear the input data and input new data, press
To continuously input after the data already input, press
* Set the speed.
High speed
* Set the stitch length
Set in the range of 1 (0.1mm) to 127 (12.7mm) using the
* When completed setting the data, press
4. The Arrow Input screen will open. (Input the sample Fig. 1 data.)
[8]-1
Medium-high speed
.
Creating simple stitching data
* Select the data type.
If the data has already been input on
the Standard screen, this data type will
not appear. As explained below, this
appears when the input data has been
cleared or not input.
Use for normal data.
Use for embroidery data and
when there are many input
points (1500 points or more).
and
keys will not appear.
.
.
Medium-low speed
to
and
* When this screen is first opened, the
code is set to FEED (feed data).
Press
and move to
the position (A point) for starting
stitching.(Movement using the arrow
mark keys will change the X and Y
position values displayed on the
screen.)
After moving, press
the current position.
(Data on feed data to point A will be
created.)
* Next, the code is set to SEW (sewing)
, so press
and move
to the position (B point) for ending
stitching.
After moving, press
the current position. (Data on straight
stitching to point B will be created.)
* Next, press
.
Low speed
,
keys.
, and set
, and set
Hide quick links:
Advertisement
Table of Contents
